Matrix T7x Manuel du propriétaire

PREMIUM TREADMILL OWNER’S MANUALT7xeT7xT5x

LOCATION OF THE TREADMILL Place the treadmill on a level and stable surface. Please leave a clear zone behind the treadmill that is at least the width

Our Treadmills are heavy, use care and additional help if necessary when moving. LEVELING THE TREADMILLUse of shim or adding leveling foot.NOTE: It is

Do not run belt faster than 1 mph while centering. Keep fingers, hair and clothing away from belt at all times.Treadmills equipped with side handrails

BELT IS TOO FAR TO THE RIGHT SIDE BELT IS TOO FAR TO THE LEFT SIDETIGHTENS RIGHT SIDE OF ROLLER TIGHTENS LEFT SIDE OF ROLLER13

USING THE HEART RATE FUNCTIONYour unit could be equipped with a heart rate pulse grip.The heart rate function on this product is not a medical device.

WIRELESS HEART RATE RECEIVERWhen used in conjunction with a wireless chest transmitter, your heart rate can be transmitted wirelessly to the unit and

17TROUBLESHOOTING& MAINTENANCE

RECOMMENDED CLEANING TIPSA Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on the treadmill. Paper towels are abrasive and

CHECK FOR DAMAGED PARTSDO NOT use any equipment that is damaged or has worn or broken parts. Use only replacement parts supplied by Matrix Fitness Sys

2

21TREADMILL ASSEMBLYThere are several areas during the assembly process that special attention must be paid. It is very important to follow the assemb

22

23

Part #: Part Name: Outline: Dimensions: Quantity: Bag Color:10 020090-00 SOCKET HEAD CAP SCREWM8 x 20mm 10 BLACK14 0000086571 FLAT WASHER8.2 x 16 x 2.

REQUIRED TOOLS13 020072-00 SOCKET HEAD CAP SCREW M8 x 1.25 x 60mm 4 YELLOW16 062769-00 SOCKET HEAD CAP SCREWM8 x 1.25 x 15mm 2 YELLOW23 0000089835 RIB

ASSEMBLY STEP 1A Cut the yellow banding straps and lift the running deck upward to remove all contents from underneath the running deck.B Open hardw

ASSEMBLY STEP 2A Open hardware bag 2.B With the console upside down, attach the console mast caps to the console using 4 bolts (e) and 4 spring wash

ASSEMBLY STEP 3A Open HARDWARE BAG 3.B Slide CONSOLE through the CONSOLE MAST BOOTS. NOTE: Make sure the arrows on the mast rings are pointing upwar

ASSEMBLY STEP 4A Open HARDWARE BAG 4.B Attach MAIN FRAME BOOTS using 4 SCREWS (D).C Before the first use, lubricate the treadmill deck by following

3IMPORTANT PRECAUTIONSSAVE THESE INSTRUCTIONSWhen using an electrical product, basic precautions should always be followed, including the following: R

ASSEMBLY STEP 5A Open HARDWARE BAG 3.B Slide CONSOLE through the CONSOLE MAST BOOTS. NOTE: Make sure the arrows on the mast rings are pointing upwar

ASSEMBLY STEP 6A Open HARDWARE BAG 4.B Attach MAIN FRAME BOOTS using 4 SCREWS (D).C Before the first use, lubricate the treadmill deck by following

ASSEMBLY STEP 7A Open HARDWARE BAG 4.B Attach MAIN FRAME BOOTS using 4 SCREWS (D).C Before the first use, lubricate the treadmill deck by following

33TREADMILL OPERATION

MANAGER PREFERENCE MODE 3X AND 5X CONSOLES:This section allows a user to manipulate default settings for the machines. It may be accessed by pressing

CONSOLE DESCRIPTION:The Matrix machine is inspected before it is packaged. It is shipped in two pieces: the base and the console. Carefully unpack the

36

T5X CONSOLE DESCRIPTIONNote: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) WO

38

T7X CONSOLE DESCRIPTIONNote: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) MU

TO REDUCE THE RISK OF BURNS, FIRE, ELECTRICAL SHOCK OR INJURY TO PERSONS: • If you experience any kind of pain, including but not limited to chest pai

40

T7XE CONSOLE DESCRIPTIONThe T7xe has a full integrated touch screen display. All information required for workouts is explained on screen. Exploration

WORKOUT DESCRIPTIONS QUICK START OPERATIONPress the GO or QUICK START button(s) and the treadmill will enter into a manual mode of operation. All ener

FAT BURN WORKOUT OPERATIONFat burn is a level-based workout that is designed to help users burn fat through various resistance changes. To enter into

WORKOUT DESCRIPTIONS FIT TESTYour Matrix treadmill offers a variety of fitness tests-the Gerkin firefighter protocol, the WFI firefighter protocol, t

Males: VO2 max (ml/kg/min) 20-29 30-39 40-49 50-59SUPERIOR >58.8 >58.9 >55.4 >52.554.0 52.5 50.4 47.1EXCELLENT 51.4 50.3 48.2

WORKOUT DESCRIPTIONS FIT TESTThe WFI (Wellness Fitness Initiative) protocol is a modified Gerkin test used by firefighters to evaluate aerobic fitnes

The Military Test programs and the Physical Efficiency Battery (PEB) provide workouts of a preset distance. These distances are established by the var

USB FEATURESSOFTWARE UPDATESThe USB port is used to update the console firmware. Copy the updated software file to the root directory of your USB driv

READYConnect your Nike Plus-compatible device to the built-in Made for iPod connector on Nike + iPod compatible fitness equipment.SETFull console cont

(CONT.) • At NO time should pets or children under the age of 13 be closer to the treadmill than 10 feet. • At NO time should children under the age o

50

51PRODUCT SPECIFICATIONS

MODEL NAME T-5x/7xTREADMILL TYPE T7xe TREADMILL T7x TREADMILLFRAME PART# T-5x/7x-FCONSOLE PART # T7xe-03-C T-7x-03-CFEATURESDECK TYPE ULTIMATE™ HARD-W

MODEL NAME T-5x/7xTREADMILL TYPE T5x TREADMILLFRAME PART# T-5x/7x-FCONSOLE PART # T-5X-05-CFEATURESDECK TYPE ULTIMATE™ HARD-WAX REVERSIBLE 1" DEC

1-866-693-4863www.matrixfitness.comMatrix Fitness1600 Landmark Drive, Cottage Grove, WI 53527Matrix Premium Treadmills Rev 1.8 | © 2012 Matrix Fitness

ELECTRICAL REQUIREMENTSFor your safety and to ensure good treadmill performance, the ground on this circuit must be non-looped. Please refer to NEC ar

GROUNDING INSTRUCTIONSThe treadmill must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electri

8

9BASIC OPERATION