Matrix SETU ATA211 SIP-FXS-FXO Spécifications télécharger pdf (Page 80)

74 Matrix SETU ATA211 System Manual

To be considered as a valid number, the number received must be equal to or more than the Minimum digits

configured. If the number received matches the Minimum digits but exceeds the maximum digits, the system will

strip off the extra digits and route the number.

If the incoming CLI does not match with any entry in Called Party Number Table (i.e. the number does not exist in

the table), the call will be routed through the destination route for the first entry at Index 001, i.e. the No Match

Found entry, in the table.

Configuring Called Party Number Table

If you have not already configured the Called Part Number Table for the SIP Trunk, you may do so now.

1. Login as Admin with your Password.

2. Click the link Advanced Settings on the left pane to expand.

3. Click Called Party Number Table.

The Called Party Number Table page will open.

4. For each Index Number,

• Enter the desired Number you want to store in the table. The number must not exceed 24 characters.

The first Index Number 001, is reserved for No Match Found. Start your entries from Index 002.

• For the number you entered, define the Minimum Digits, which the system must receive to consider it

as a valid number. Default:01

• For the number you entered, define the Maximum Digits. The number received must not exceed the

maximum digits you have defined here. Default:24

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 175 176

Pas de commentaire

Matrix SETU ATA211 SIP-FXS-FXO Spécifications Page 80