Matrix SETU ATA211 SIP-FXS-FXO Manuel d'utilisateur télécharger pdf (Page 4)

KEY FEATURES

Allowed and Denied Numbers Network Port Parameters

Automatic Number Translation Peer-to-Peer Calling

Call Progress Tones and Rings

PIN Authentication

Caller Line Identification and Presentation (CLIP)

Prefix to Domain Name Conversion

CLI based Call Routing

Remote Held/Transfer

Call Detail Record (CDR)

SIP Accounts

Day Light Saving

Universal Routing

Fax over IP (FoIP)

VLAN Tagging

FXO

Web Based Programming

Allowed and Denied Lists are used to restrict dialing of HTML based GUI of SETU VFXTH provides a

long-distance and international numbers. A number is configuration menu to program its network port

blocked if its prefix matches with any entry in the Denied parameters to match the LAN addressing scheme of

Lists. On the other hand, a number is allowed to go the installation site. Parameters such as IP address,

through if it matches with any entry in the Allowed List. subnet mask, connection type, etc. can also be

This provides flexibility of allowing only specific programmed through a telephone instrument

numbers, blocking all others. connected to the system.

This feature allows the Gateway to translate the number SETU VFXTH supports VoIP calls between two

string dialed by the user to a format compatible with the locations without going through a proxy server. Fixed IP

network through which the call is to be routed. So, the addresses of various locations can be programmed in

user can dial numbers freely without worrying about the the Peer-to-Peer table of the gateway to avail this

network through which the call will be routed. facility. The gateway supports 500 entries in the Peer-

to-Peer table. Numerical dialing codes can be defined

to simplify the calling between various locations.

The gateway offers flexibility of programming call

progress tones and ring cadence to match the standards

of the country of installation. Country Specific Call The gateway uses PIN Authentication to verify a caller's

Progress tones like Dial Tone, Ring Back Tone and Busy identity before routing the call from one network to

Tone, etc. can also be programmed. another. It is an important feature that prevents

unauthorized usage.

SETU VFXTH can provide Caller Line Identification

Presentation (CLIP) on FXS ports. Analog CLIP This feature enables the conversion of a numerical

protocols such as DTMF, FSK ITU-T V.23 and FSK code dialled by the user to a domain name. It helps the

Bellcore 202A are supported by the gateway. SIP service provider to understand and route the call to

the required destination.

A call can be routed to a fixed number from the CLI

presented on SETU VFXTH. When a call lands on the The user of SETU VFXTH can keep a called person at

network ports of the SETU VFXTH, it detects the CLI, remote end on hold or even transfer the call to a third

verifies the CLI and routes the call to the predefined person. This feature can be activated only if the device

number. at the called end supports Call Hold/Call Transfer

feature.

SETU VFXTH can store details of 2000 calls in its

memory. Call reports can be generated using filters like

A maximum of 32 SIP accounts can be programmed

source port, destination port, calling number, called

and each FXS user can be assigned one of the SIP

number, date, time and duration.

accounts for outgoing calls. Dynamic allocation of SIP

accounts is also possible using the Dial Plan. These

SIP accounts can be from multiple service providers or

The Real Time Clock of the SETU VFXTH moves forward

all from a single service provider.

or backward automatically in tune with the Day Light

Saving requirement of the country where it is installed.

The options like Week-Day-Month or Date-Month are

Universal Routing allows the gateway to route a call

provided to move the clock forward and backward

received from one network to another based on the

automatically on the specified day, date and time.

routing mechanism programmed in the system. A

source port can be programmed for more than one

destination ports so that if one port is busy, the call can

The Matrix SETU VFXTH user can send and receive Fax

be routed through another port.

over SIP account, when the FAX machine is connected to

the FXS port. The SETU VFXTH supports FoIP using T.38

Vocoder and Pass-Through.

A Virtual Local Area Network (VLAN) may be defined as

a group of LANs that have different physical

connections, but which communicate as if they are

The gateway offers FXO port to connect the PSTN

connected on a single network segment. VLANs

network and route incoming calls to VoIP network or the

increase overall network performance by grouping

extensions. It can also be used to connect extension of a

users and resources that communicate most

PBX to network two PBX over VoIP.

frequently with each other.

Matrix SETU VFXTH incorporates Built-in HTTP server

and web pages for easy configuration. This Web based

programming feature allows a user to configure the

gateway from any part of the world, once connected to

the IP network

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Matrix SETU ATA211 SIP-FXS-FXO Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Passerelles/contrôleurs Matrix SETU ATA211 SIP-FXS-FXO